Sign In | Join Free | My lightneasy.org
China Sinuo Testing Equipment Co. , Limited logo
Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Verified Supplier

7 Years
Home > Switch Life Tester >

IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables

Product Categories
Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables

Brand Name : Sinuo

Model Number : SN2301

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Customized

Payment Terms : T/T

Supply Ability : 20 Sets Per Month

Delivery Time : 30 days

Packaging Details : Plywood Case

Applied Standard : IEC 60245-1

Applied Clause : Clause 5.1.5

Sample : 1mm2~630 mm2 conductor core

Two voltage chuck spacing : 100~1000mm

Overall size : 1460×210×120 mm

Adaptive bridge : Four-point bridge

Brand : Sinuo

Warranty : 1 year

Contact Now

IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables

Product information:

This product is used for DC resistance measurement of various power cables and electrical equipment wires and cables. It can also be used to measure the DC resistance of other conductor materials.

Technical parameters:

1. The scope of application of the sample: 1mm2~630 mm2 single or multiple stranded conductor core.

2. Two voltage chuck spacing: 100~1000mm

3. Overall size: 1460×210×120 mm

4. Adaptive bridge: four-point measurement method of any bridge

Operation steps:

IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables

1. Adjust the distance. Since the clamp of this clamp is adjustable, the operator needs to check whether the distance between the two voltage clamps is 1m before measuring. The fixture must be regularly checked for 1 meter length by the local calibration department.

2. Adjust the distance between two adjacent current fixtures and voltage fixtures. The distance should be no less than 1.5 times the circumference of the cross-section of the sample being tested.

3. Wiring. Connect the bridge to the bridge clamp. Connect the wires between the two voltage clamps in the clamp.

4. Install the specimen. Unscrew the two current clamps and place the sample in the current clamps ① and ④. Straighten the specimen and clamp it. Turn the tensioning handle ⑥ to tighten the sample (do not use excessive force). Then gently clamp the voltage clamps ② and ③ until there is effective contact.

5. Start the test and record it.

Bridge Fixture Wiring Diagram:

IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables

IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables

IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables

IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables


Product Tags:

Power Cables Cable Clamping Device

      

IEC 60245-1 Cable Clamping Device

      

DC Resistance Measurement Cable Clamping Device

      
Buy cheap IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables product

IEC 60245-1 Cable Clamping Device For DC Resistance Measurement Of Power Cables Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Sinuo Testing Equipment Co. , Limited
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like