IEC 60670-1 Mounting Box Force Test Device Force 0-500N For Enclosures Classified Testing
Product information:
Standard: The device is designed and manufactured according to the standard requirements of IEC60670-1 Clause 12.13, figure 16.
Sample: Concealed and semi-concealed mounting boxes and enclosures classified according to IEC60670-1 Section 7.2.2.2 and 7.2.2.3.
Test purpose and principle: Install the installation boxes and housings classified in 7.2.2.2 and 7.2.2.3 on wooden walls, wooden ceilings, cold-bent steel structure walls, and finished products according to the standard requirements. Apply force in the installation direction to simulate the force it bears in normal installation and verify its deformation.
Equipment Structure and Features:
The device consists of a mounting plate, a lever, a fixed pulley mechanism, a weight and a frame.
Equipment dimensions: about: 500×500×1000 (mm) W×D×H, equipment weight: 75kg
Technical parameters:
| Test station | Single |
| Mounting plate | Wall simulation wood: 38*90mm wood 1 piece Ceiling simulation wood: 38*190mm wood 1 piece Cold-bent steel structure: made according to Figure 16 1 piece Finished product simulation mounting box: 9.5mm thick plywood 20 pieces |
| Applied force value and judgment | 12.13.2 Clause 225N 5min Horizontal displacement does not exceed 3mm 12.13.3 Clause 225N 1min Horizontal displacement does not exceed 6mm 12.13.4 Clause 180N 5min Horizontal displacement does not exceed 2mm in both directions 12.13.16 Clause 222N 5min |
| Force range | 0-500N, resolution 0.1N, accuracy 1% |
Product Tags:
|
|
IEC 60670-1 Mounting Box Force Test Device Force 0-500N For Enclosures Classified Testing Images
|
