Home > Switch Life Tester >

1 Or 3 Stations Switch Life Tester IEC 60884-1 Figure 27 And 42 Power Cables Low Temperature Impact Test Apparatus

Product Categories

Electrical Appliance Testing Equipment [376]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [136]
Battery Testing Equipment [67]
Switch Life Tester [271]
Led Testing Equipment [71]
Water Ingress Testing Equipment [83]
Environmental Test Chamber [106]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

1 Or 3 Stations Switch Life Tester IEC 60884-1 Figure 27 And 42 Power Cables Low Temperature Impact Test Apparatus

Name: 1 Or 3 Stations Switch Life Tester IEC 608841 Figure 27 And 42 Power Cables Low Temperature Impact Test Apparatus
Brand: Sinuo
Price: 1 USD

Buy cheap 1 Or 3 Stations Switch Life Tester IEC 60884-1 Figure 27 And 42 Power Cables Low Temperature Impact Test Apparatus product

Brand Name : Sinuo

Model Number : SN2127

Certification : Calibration Certificate(cost additional )

Place of Origin : China

MOQ : 1 Set

Price : Negotiable

Payment Terms : L/C, T/T

Supply Ability : 10 Sets / Month

Delivery Time : 30 days

Packaging Details : Standard Exporting Plywood Case

Standard Clause : IEC60884 Clause 24.4, 30.4

Test Figure : Figure 27 and 42

Test Stations : 1 or 3

Impact Height : 100mm

Steel Intermediate Piece : Φ20mm

Impact Hammer Weight : 1000±2g and 100±1g

Contact Now

IEC 60884-1 Figure 27 and 42 Low Temperature Impact Test Apparatus

Product information:

The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on. This device is used to check the impact resistance at low temperature of electrical accessories, as well as wires and cables.

Equipment characteristics:

This device should be used with low temperature chamber, the device should be placed on the sponge rubber pad of about 40mm thick, and should be put in the low temperature chamber before and during the test.

Technical parameters:

Model	SN2127	SN2127A
Station	Single station	Three stations
Weight of the impact hammer (g)	1000±2 and 100±1	100, 200, 300, 400, 500, 600, 750, 1000, 1250, 1500(See table 1 and 2)
Height of the impact (mm)	100	100
Steel intermediate piece	Φ20, bottom end rounded R300, 100g	Φ20, bottom end rounded R300, 100g
Applied Standard	IEC60884-1 24.4 Figure 27 IEC60884-1 30.4 Figure 42	IEC60811-1-4
Operation	Manual, mechanical release	Manual, mechanical release

Table1 For power cables for fixed installation, the mass of the hammer for testing the samples shall be as given in the following table:

Overall diameter (mm)		Mass of hammer (g)
Above	Up to and including	Mass of hammer (g)
-	4.0	100
4.0	6.0	200
6.0	9.0	300
9.0	12.5	400
12.5	20.0	500
20.0	30.0	750
30.0	50.0	1000
50.0	75.0	1250
75.0	-	1500

Table 2 For flexible cables and cords and telecommunication cables, the mass of the hammer for testing the sample shall be as follows:

Overall diameter (mm)		Mass of hammer (g)
Above	Up to and including	Mass of hammer (g)
For flat cords		100
-	6.0	100
6.0	10.0	200
10.0	15.0	300
15.0	25.0	400
25.0	35.0	500
35.0	-	600

Product Tags:

switch endurance tester

switch life testing machine

1 Or 3 Stations Switch Life Tester IEC 60884-1 Figure 27 And 42 Power Cables Low Temperature Impact Test Apparatus Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!